China Hoja de aluminio 6082-T651 Fabricantes

productos nuevos

Home > Lista de Producto > Producto de aluminio > Placa / lámina de aluminio > Hoja de aluminio 6082-T651

Hoja de aluminio 6082-T651

Descripción del producto

\ n Descripción del producto \ n \ n

Specification	Name: 6000 series Aluminum Sheet
	Alloy: 6061, 6082, 6063 etc.
	Temper: O, H112, T4, T6, T651 etc.
	Thickness: 6-200mm
	Width: Up to 1500mm
	Surface treatment: mill finished, Print marks
Feature	Machinability: In the harder T 4 and T6 tempers it is good. It is notably less easy to machine in the annealed temper.
	Forming: Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods.
	Welding: It has very good welding characteristics and may be welded by all of the common welding techniques.
	Heat Treatment: Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling.
	Forging: It is capable of being hot forged at temperatures in the range of 900 F to 750 F.
	Hot Working: Hot working may be done in the temperature range of 700 F to 500 F.
	Cold Working: Cold working in the O temper condition is readily performed. The alloy is notably less easy to cold form in the T 4 and T 6 tempers.
	Annealing: Annealing should be done at 775 F for 2 to 3 hours followed by controlled cooling at 50 f per hour down to 500 F, then air cool.
	Aging: The aging precipitation heat treatment is done at 350 F for 8 hours followed by air cooling. This produces the T6 temper.
Application	Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, pipelines, various toolings etc.
Alloy	Chemical Component %≤
	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	others		Al
										single	total
6061	0.4- 0.8	0.7	0.15-0.4	0.15	0.8- 1.2	0.04-0.35	\	0.25	0.15	0.05	0.15	remainder
6082	0.7- 1.3	0.5	0.1	0.4- 1.0	0.6- 1.2	0.25	\	0.2	0.1	0.05	0.15	remainder
6063	0.2- 0.6	0.35	0.1	0.1	0.45-0.9	0.1	\	0.1	0.1	0.05	0.15	remainder

\ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n \ n Embalaje y envío \ n Pago: pago por T / T, 30% como pago por adelantado y 70% de saldo pagado antes del envío. \ n Tiempo de entrega: 10 días después de recibir el depósito por T / T o L / C. \ n Embalaje: bolsa tejida, envoltura de plástico y embalaje de madera o como su requisito \ n

Stirp:Wooden box or carton box; max 3 tons/wooden box;50kgs/carton box.
Coil: Wooden pallet,max 3tons/wooden pallet.
Flat bar : wooden box or bundled by waterproof woven cloth, max 3 tons.
Sheet/Plate: wooden pallet, max 3 tons
Wire: carton box,50~100kgs/CTN

Stirp:Wooden box or carton box; max 3 tons/wooden box;50kgs/carton box.

Coil: Wooden pallet,max 3tons/wooden pallet.

Flat bar : wooden box or bundled by waterproof woven cloth, max 3 tons.

Sheet/Plate: wooden pallet, max 3 tons

Wire: carton box,50~100kgs/CTN

\ n Envío \ n

20'GP: Max load weight:20 tons
40'GP: Max load weight:25 tons
40'HQ: Max load weight:25 tons

20'GP: Max load weight:20 tons

40'GP: Max load weight:25 tons

40'HQ: Max load weight:25 tons

\ n \ n Nuestros servicios \ n 1.MTC se emitirán después de terminar la mercancía. \ n 2. Se puede aceptar la inspección de terceros. \ n \ n \ n Información de la empresa Tianjin Yichengtong Steel Trade Co., Ltd \ n Estábamos Establecido en 2008. Nuestra empresa se especializó en productos de acero inoxidable, productos de acero galvanizado, productos de acero con recubrimiento de color, bobina de acero CR / HR, barras redondas, etc. \ n Espíritu de empresa: dedicación, esfuerzo, práctica e innovación \ n filosofía de operación : cooperación sincera y beneficio mutuo \ n Objetivo de la empresa: buscar la excelencia y esforzarse por ser el mejor \ n Principio de la compañía: gestión creíble y desarrollo conjunto \ n \ n Preguntas frecuentes